Redirecting...

Dover AFB partners with AFRL to innovate in fuel efficiency

  • Published
  • By Roland Balik
  • 436th Airlift Wing Public Affairs
As Air Mobility Command focuses on the innovations necessary to maintain the Air Force's competitive advantage, Mobility Airmen provided insight to help the Air Force improve C-17 Globemaster III capabilities and save money in the future.

The Air Force Research Laboratory's Advanced Power Technology Office from Wright-Patterson Air Force Base, Ohio, collaborated with Dover AFB Airmen and private companies on programs to make the entire C-17 Globemaster III fleet lighter, safer and more fuel efficient Jan. 30, 2018.

Three programs currently being developed by APTO to improve the C-17 fleet include the installation of Microvanes, the use of synthetic tie-downs instead of cargo chains and the use of winch cables instead of steel cables.

In September 2017, APTO showcased three ongoing programs using a C-17 set up by 736th Aircraft Maintenance Squadron personnel to Roberto Guerrero, deputy assistant secretary of the Air Force for operational energy.

“We visited Dover (AFB) late last year (2017) to do some demonstrations, and we received useful feedback from the local crew for redesigning our system. We wanted to come back to see how they liked the changes and get more feedback from them” said Justin Smoak, Samson Rope application engineering manager, from Ferndale, Washington.

Microvanes

The nylon Microvanes being tested are filled with 3D printed glass beads. Each Microvane is 2.4 inches tall and 16 inches in length. The addition of Microvanes to the C-17s are an effort contracted with Lockheed Martin to reduce drag and fuel consumption that is currently being considered for transition by AMC.

Using a Mylar template, 736th AMXS maintenance personnel installed 12 Microvanes, six on each side at the rear of a C-17 fuselage that gave Guerrero a first-hand look.

“Microvanes essentially clean up the airflow in the region of the cargo door by re-energizing the air with small vortices that delay separation, smooth the flow, and reduce drag,” said Capt. Randall Hodkin, AFRL Advanced Power Technology Office aviation working group lead. “Historically, cargo aircraft have airflow issues in the aft region of the airframe due to the required upsweep of the fuselage to integrate a cargo ramp.”

According to Hodkin, if all 222 Air Force C-17s had Microvanes installed, fuel savings per year could range up to 2 million gallons, equating to five to seven million dollars depending on fuel prices and mission.

“With support from Dover AFB, we were able to validate that the tooling developed as part of the AFRL program can position C-17 Microvanes in the correct location to achieve the expected 1 percent fuel savings,” said Hodkin.

C-17 Microvane flight testing was conducted by the 412th Test Wing at Edwards AFB, California, between August and December 2016. This valuable flight test program was able to validate that Microvanes reduce drag by 1 percent when in cruise. In addition, the Edwards AFB flight tests also included several test scenarios to validate that Microvanes do not affect the critical C-17 air drop mission capability.

Synthetic Tie-downs and Winch Cables

In addition to installing the Microvanes, the team also tested synthetic tie-downs and winch cables. Tie-downs are ropes, cords, straps or chains that secure items during airlift operations. Winch cables help adjust the tension on tie-downs, securing the load.

AFRL, Hodkin, Samson Rope application engineers, along with an AMC subject matter expert, also returned to Dover AFB at the end of January to demonstrate fit-for purpose synthetic tie-down assemblies and a custom engineered winch cable. These solutions were developed after feedback from an operational evaluation at Charleston AFB in 2016 and the previous demonstration at Dover AFB.

“For the winch cable, safety is definitely paramount,” said Senior Master Sgt. Jeff Witherly, Headquarters, AMC C-17 evaluator loadmaster, from Scott AFB, Illinois. “The steel cable we currently have could possibly snap and whiplash, whereas the new synthetic cable fails in a more predictable and controlled manner.”

The proposed use of the 280-foot synthetic winch cable weighing 14 pounds is 83 percent lighter than the current 80-pound steel wire cable.

Loadmasters from the 3rd Airlift Squadron also helped Witherly, Hodkin, and Samson Rope application engineers with concerns regarding how the synthetic chain would fit in a slotted interface designed for steel chains on the buffer stop assembly, a device used during specific airdrop missions to keep pallets from shifting forward in the cargo compartment.

“We received excellent feedback on the final version of the synthetic tie-downs even though they did not interface as nicely with the BSA grooves as we’d like,” said Hodkin. “The loadmasters said that the tie-downs would work with the interface, but could be placed around the BSA frame next to the grooved interface to better restrain the BSA.”

Witherly also said that “When using synthetic chains, the change would be transparent to loadmasters for most applications, but the weight difference would be significant and noticeable.”

Transitioning the existing 92 C-17 steel chains to synthetic tie-down assemblies can remove 1,000 pounds of excess weight from the aircraft, potentially reducing the annual C-17 fuel budget by $1 million and improving mission capabilities.

Way Forward

“The programs APTO is working on are great examples of how we can increase our combat capability through the smart use of operational energy,” said Guerrero.

The next step in replacing the steel wire winch cable and tie-downs with a synthetic is to have them approved as official AMC requirements. If approved, additional ground or flight testing would be the next step prior to fleet-wide implementation.